	PAD PRINTING SOLUTIONS
Introduction to Pad Printing Product Line Demo Machine Selection Accessories Pad Printing Applications Consumables

	LASER MARKING SOLUTIONS
Product Line Laser Technologies Laser Applications Laser Accessories


	DIGITAL PRINTING SOLUTIONS
Introduction to Digital Printing Product Line

Trouble shooting Guide

A decisive factor in obtaining a high quality print in the pad printing process is the choice of pads, inks, plates and close cup ring/ Doctor Blades.

Rita pad has developed over more than 12 years and continue to improve, a complete range of products specially, studies to maximize the performance of Pad Printing machine. Our aim is to solve all component printing problems, doing our best to be worthy of the trust which thousands of our customers has given us over the years.

PRECAUTION AND SOLUTION TO THE PROBLEMS GENERALLY FACED DURING PRINTING

Problem 1	:	Ink does not transfer from the pad to the object to be imaged.
Problem 2	:	Ink is dry on the pad before transfer
Problem 3	:	Ink from the non-image area of the cliché transfer to the finished piece
Problem 4	:	Transferred images smeared or burred
Problem 5	:	Image is distortedon small flat part (Image are onesquare inch/6.45square cm. Or less)
Problem 6	:	Image distortionon cylinder printingless than 100degree curvature
Problem 7	:	ing (spots) in the printed image
Problem 8	:	Printed image Does not pass rub& tape test
Problem 9	:	Part of the image is not printing (loss of fine detail and lines)
Problem 10	:	Ink dries quickly in the cliché .
Probl em 11	:	Pad does not pick a complete image from the cliche .
Problem 12	:	Cobwebs or feathering at the edge of the image.
Problem 13	:	Pinholes in the image or on the background .
Problem 14	:	Splashes
Problem 15	:	Ink distribution is not uniform on substrate .
Problem 16	:	Poor Opacity.
Problem 17	:	Contours are not claer.
Problem 18	:	Imaging on compound Curves results in distorted image .
Problem 19	:	Transferred image Image does have sufficient glass.
Problem 20	:	Colour of transferred Image does not match original colour
Problem 21	:	Shadow or hazeon cliché.
Problem 22	:	Internal registration of a multicolored image is good in the center but gets worse toward the edges of the print .

Scale Printing Machine, Pen Printing Machine, Laser Marking Machine, Digital Printing Machine, Printing Machine, Laser Application, Pad Printing Application, Wheel Rim Printing Machine, Electrical and Electronics Components Printing Machine, Disposable Syringe Printing Machine, Bottle Cap Printing Machine, Automobile Components Printing Machine, Digital Pad Printing, MCB Printing Machine, Pad Printing Accessories and Consumables, Multistep Marking Switches, Cutting of Solar Cell Panels